| Contents: |
Section 1:Introduction to Shaft
Alignment.
Calculating Energy Savings. Calculating Bearing Life Reduction.
Overview of Offset, Angularity and Tolerances
|
Section 2: Alignment Processes
and Tools. Determining Purpose/Type of Task.
Alignment Check Procedure.
Alignment Correction Procedure.
Checking and Compensating for Bar Sag.
Measuring Shaft Offset with Dial Indicators.
Ensuring Accuracy of Dial Measurements.
Measuring Shaft Angularity with Dial Indicators. |
Section 3: Pre-alignment
Procedures.
Checking Run out.
Checking Pipe Strain.
Correcting Gross Soft Foot.
Performing Rough Alignment.
Setting the Coupling Gap.
Tightening Hold Down Bolts.
Performing a Final Soft Foot Check.
Correcting Soft Foot.
|
Section 4: Rim-Face Alignment
Method.
Mounting the Dial Indicator Fixtures.
Measuring the A, B, & C Dimensions.
Obtaining As-Found Readings.
Measuring & Interpreting Horizontal Misalignment.
Calculating the Front and Rear Feet
Positions.
Rim-Face Calculation Precautions.
Constructing a Rim-Face Graph.
Plotting Offsets.
Determining the Movable Shaft Position.
Rim-Face Graphing Precautions.
Making Vertical Corrections.
Making Horizontal Corrections. |
Section 5: Reverse Rim
Alignment Method.
Mounting the Dial Indicator Fixtures.
Measuring the A, B, and C Dimensions.
Obtaining As-Found Readings.
Measuring & Interpreting Vertical Misalignment.
Measuring & Interpreting Horizontal Misalignment.
Calculating the Front and Rear Feet Positions.
Reverse Rim Calculation Precautions.
Constructing a Reverse Rim Graph.
Plotting Offsets.
Determining the Movable Shaft Position.
Reverse Rim Graphing Precautions.
Making Vertical Corrections.
Making Horizontal Corrections. |
|
| Precision Shaft Alignment
Reference Guide |
| by Vibralign, 80pp, 1997, ISBN:
0966820606 |
|
 |
This handy
pocket-sized guide from Vibralign allows you to give each of your skilled
tradesmen who perform alignment a ready reference they can carry with them to
any job site.
Packed with practical information that is critical to performing successful
alignment, this book is especially valuable for people that do machine alignment
regularly, and may need a little review when it's time to do an alignment job.
Get one for all your millwrights,
mechanics, and any others who do machinery alignment! Available only in packages
of ten. |
|
| |
| $100.00 |
|
Precision Shaft Alignment Reference
Guide (Package of 10) - $100.00 |
 |
| |
|
| Precision
Shaft Alignment Reference Guide (Package of 10) + Alignment
Fundamentals CD-ROM - $395.00 |
|
| |
|
| Precision Shaft
Alignment Reference Guide (Package of 10) + Alignment Fundamentals CD-ROM +
Shaft Alignment Handbook - $534.95 |
|
| |
|
|
|