| Electrical
Maintenance and Inspection Series |
| Electrical accidents, equipment failure, and downtime are often the
result of inadequate maintenance or inspection practices. Implementing a
good maintenance routine is imperative to maintain profits and minimize
costs and outages. |
|
Our new twelve-part video training series shows plant workers and
supervisors how and what to inspect to optimize maintenance dollars.
This series will teach you how to
reduce machinery failures and unscheduled outages so you can improve
equipment reliability and increase run time.
On-site demonstrations at actual
production facilities and computerized animation will teach you how to
analyze the results of a maintenance and inspection program and identify
existing and potential trouble spots. |
| $3495.00 (12video series) |
Electrical
Maintenance and Inspection
Video Series - $3495.00  |
| These videos can
also be purchased separately as shown: |
| Basic
Electrical Safety. Covers electrical injuries, types of
electrical hazards, common electrical accidents, and guidelines on working
safely near electricity. 13 minutes. $295.00 |
| The Value of Inspection.
Explains the types of preventive maintenance, benefits of inspection and
maintenance and condition-based maintenance methods. 10:30 minutes.$295.00 |
| NEC Compliance Inspections.
Describes service requirements, common mistakes, safe working distances,
grounding, wire sizes and types, equipment protection, and circuit breakers and fuses.18:30 minutes. $295.00
|
| Hazardous Environments.
Reviews NEC environment guidelines, categories of hazardous
environments, types of equipment approved for use, equipment marking, and common problems.10:30 minutes. $295.00 |
| Electrical
Protective Systems: Inspection and Testing.
Outlines the different types of protective systems and how to test
them. Methods include: engineering analysis, engineering studies, harmonic
analysis, condition and serviceability inspections, and ground mat analysis. 14 minutes.$295.00 |
| Circuit Breakers:
Inspection and Testing. Illustrates the different types of circuit
breakers and inspection techniques and how to test them using contact
resistance measurements, primary injection tests, high potential tests, and more.15:30 minutes. $295.00 |
| Transformers:
Inspection and Testing. Covers dry-types, liquid-filled, and instrument
transformers. Explains why transformers fail and how to safely inspect them. 17 minutes.$295.00 |
| Switchgear:
Inspection and Testing. Describes panel board and metaclad switchgear and
how to inspect them using mechanical, visual, and electrical testing.
11:30 minutes. $295.00 |
| Rotating Equipment:
Inspection and Testing. Explains how to extend the life of generators and
motors. Also describes in-service inspections, current and voltage tests,
vibration analysis, and insulation resistance testing. 13:00 minutes. $295.00
|
| Protective Relays:
Inspection and Testing. Shows how instantaneous and built-in delay relays
work. Explains how to inspect and maintain relays using as-found tests,
visual and mechanical inspection, and as-left testing. 17 minutes. $295.00 |
| Safety Inspections.
Explains how to conduct inspections according to OSHA standards.
Also covers installation inspections, safe distance requirements, wiring
design and protection inspections, and electrical safety-related work practices.14:30 minutes. $295.00 |
| Condition-Based Maintenance.
Explains the theory of condition-based and predictive maintenance
and shows how to create a real-world performance baseline to tailor a
program to fit your company. 9 minutes. $295.00
|
|
