Electrical/Electronics Test Equipment CD-ROMs

Electrical/Electronic Test Equipment CD-ROM Courses

The following interactive multimedia CD-ROMs are available on the topic of electrical/electronic test equipment. The following 3 courses are available to choose from:

=======================================================

Electrical/Electronics Test Equipment: Multimeters CD-ROM

Duration: 6 hours (includes 1 test)

What Students Learn: This comprehensive Activ® interactive multimedia training program consists of three lessons that train participants how to properly use multimeters, megohmmeters, clamp-on ammeters, wheatstone bridges, and oscilloscopes.

This lesson demonstrates and explains how to use both a digital and an analog multimeter. During this lesson, voltage, resistance, current, capacitance, and frequency are measured. This lesson also describes some of the more common features of a digital multimeter.

After completing the lesson, the learner will be able to:

    •   Identify and describe the display area, the function switch, and the leads/jacks on a digital multimeter.
•   Adjust the mechanical zero and interpret a reading on the voltage scale, and the resistance scale of an
     analog multimeter.
•   Given an expected measurement, set the function and range switches of an analog multimeter and adjust
     the zero on the ohms scale.
•   Know how to use a multimeter for a variety of purposes, including checking for continuity across a
     circuit, measuring resistance, current, frequency, AC and DC voltage, and capacitance.
•   Use the hold button, relative button, range button, and min/max button on a DMM.

Special Notes: This training program is delivered by multimedia CD-ROM and can be accessed on a stand alone PC or in a networked learning center.

Electrical/Electronics Test Equipment: Multimeters CD-ROM - $349.95

==============================

Electrical/Electronics Test Equipment: Oscilloscopes CD-ROM

Duration: 6 hours (includes 1 test)

Audience: This program is excellent for the training of electricians and electronic technicians as well as for the multicraft training needs of process and manufacturing facilities. This lesson is designed for participants familiar with AC and DC theory, electrical safety, and electrical print reading. A basic understanding of electronic devices and circuits is recommended.

This lesson explains and demonstrates the use of both analog and digital oscilloscopes. Participants will learn the controls on each type of oscilloscope, how to use a probe with an oscilloscope, how to set up an oscilloscope, and how to determine various measurements taken with an oscilloscope.

After completing the lesson, the learner will be able to:

    •   Describe what an oscilloscope is and how it works.
•   Explain the function of its display system, vertical system, horizontal system, trigger system and their
     controls.
•   Describe different probe types and their applications.
•   Adjust the display controls.
•   Set the trigger, vertical and horizontal controls to display a given waveform on an oscilloscope.
•   Identify sine, square, sawtooth, triangle, pulse, step, and complex waveforms.
•   Measure the voltage, period and frequency of a waveform.
•   Analyze its shape and perform waveform phase measurements.

Special Notes: This training program is delivered by multimedia CD-ROM and can be accessed on a stand alone PC or in a networked learning center.

Electrical/Electronics Test Equipment: Oscilloscopes CD-ROM - $349.95

==============================

Electrical / Electronics Test Equipment: Ammeters, Meggers,
and Wheatstone Bridges CD-ROM

Duration: 6 hours (includes 1 test)

Audience: This program is excellent for the training of electricians and electronic technicians as well as for the multicraft training needs of process and manufacturing facilities. This lesson is designed for participants familiar with AC/DC theory, electrical safety, and electrical print reading. A basic understanding of electronic devices and circuits is recommended.

This lesson describes Wheatstone bridges, megohmmeters, and clamp-on ammeters. This lesson provides examples of the use of these instruments, identifies their components, and defines their functions. This lesson also describes safety and selection considerations for their use, describes how to set up the instruments, how to connect them to the systems under test, and how to take and read measurements. This lesson describes how to take a resistance reading of a Three-phase AC motor with a megohmmeter, how to set mechanical and electrical zero on a Wheatstone bridge, and how to interpret a Wheatstone bridge reading. This lesson also defines the "record" and "lock" features of a clamp-on ammeter and describes how to modify the range of the meter for the best results.

After completing the lesson, the learner will be able to:

    •   Explain the use of a megger, identify its basic components and define its function.
•   Describe the safety and selection considerations for using a megger, and describe the procedures for
     setting a megger up.
•   Know how to attach the leads to the system and take a reading of a Three-phase AC motor.
•   Define a bridge circuit and identify the components and function of a Wheatstone bridge.
•   Describe how to take a reading with a Wheatstone bridge and interpret it.
•   Identify the components, range, function, and safety and selection considerations for a clamp-on
     ammeter.
•   Describe the procedures for setting up a clamp-on ammeter, know how to take a reading and
     modify the range.

Special Notes:

This training program is delivered by multimedia CD-ROM and can be accessed on a stand alone PC or in a networked learning center.

Electrical/Electronics Test Equipment: Ammeters, Meggers,
and Wheatstone Bridges CD-ROM - $349.95

==============================

Note: CD-ROM Pricing is for the single user/single PC version.
Call 888-777-0753 for network or multiple user pricing.

To order by phone please call toll-free 888-777-0753 during regular business hours.