Instrument Calibration CD-ROMs

Instrument Calibration CD-ROM Courses

The following interactive multimedia CD-ROMs are available on the topic of instrument calibration. The following 5 courses are available to choose from:

=======================================================

Instrument Calibration: Calibration Principles CD-ROM

Duration: 6 hours (includes 1 test)

Audience: This program was designed for instrument technicians and electricians as well as for the multicraft training needs of process and manufacturing facilities. This lesson is designed for participants familiar with instruments and their functions within a typical feedback/control loop. An understanding of algebra is also recommended.

What Students Learn: This comprehensive INVOLVE® interactive multimedia training program was produced in association with the Instrument Society of America. (ISA). This five lesson program trains participants to calibrate pressure, differential pressure, temperature, flow, and level instruments.

This lesson introduces basic concepts of instrument calibration. The lesson explains the characteristics of proper instrument performance as well as how to identify common instrument errors. In addition, the steps in a typical calibration procedure are demonstrated.

After completing the lesson, the learner will be able to:

    •   Define calibration.
•   Recognize if an instrument is properly calibrated by examining the instrument input and output.
•   Explain how calibration affects quality, productivity, and safety.
•   Identify conditions when calibration is performed, such as at an installation, periodic scheduled
     maintenance, in response to process deviation, and after repair or change in mounting position.
•   Recognize accuracy and precision.
•   Identify zero shift, span error, combined zero shift and span error, and non-linearity with a pattern of
     instrument readings on an input/output graph or calibration data sheet.
•   Identify the basic elements of a calibration set up.
•   Identify the input values for a five point calibration check as a percent of the instrument's range.

Special Notes: This training program is delivered by multimedia CD-ROM and can be accessed on a stand alone PC or in a networked learning center.

Instrument Calibration: Calibration Principles CD-ROM - $349.95

==============================

Instrument Calibration: Calibrating Pressure and
Differential Pressure Instruments CD-ROM

Duration: 6 hours (includes 1 test)

Audience: This program was designed for instrument technicians and electricians as well as for the multicraft training needs of process and manufacturing facilities. This lesson is designed for participants familiar with the basic principles of calibration including the steps of a calibration procedure, common instrument errors, and the standards for instrument performance. An understanding of algebra is also recommended.

This lesson demonstrates the necessary steps for calibrating pressure instruments. The lesson also identifies procedures and set up equipment for pressure calibration. Emphasis is placed on selection of the appropriate test instruments and interpretation of readings.

After completing the lesson, the learner will be able to:

    •   Set up a pressure transmitter, differential pressure transmitter, and a pressure gauge for calibration
     with the appropriate input and output test equipment, proper connections, and mountings.
•   Perform a five-point calibration check on an analog electronic pressure transmitter, a differential
     pressure transmitter, and a pressure gauge.
•   Identify zero shift, span error, combined error, and nonlinearity.
•   Properly adjust pressure instruments to eliminate errors.
•   Use a digital interface device to re-range a smart pressure transmitter.

Special Notes: This training program is delivered by multimedia CD-ROM and can be accessed on a stand alone PC or in a networked learning center.

Instrument Calibration: Calibrating Pressure
and Differential Pressure Instruments CD-ROM - $349.95

==============================

Instrument Calibration: Calibrating Temperature Instruments CD-ROM

Duration: 6 hours (includes 1 test)

Audience: This program was designed for instrument technicians and electricians as well as for the multicraft training needs of process and manufacturing facilities. This lesson is designed for participants familiar with the basic principles of calibration including calibration procedures, common instrument errors, and the standards for instrument performance. An understanding of algebra is also recommended.

This lesson teaches basic procedures for checking the calibration of thermocouples and RTDs, as well as for calibrating temperature instruments including thermocouple transmitters and RTD transmitters. Procedures using thermocouple and RTD tables are presented in addition to calibration steps using a digital temperature calibrator.

After completing the lesson, the learner will be able to:

    •   Identify common test equipment used as measurement standards for calibration of temperature
     instruments.
•   Properly set up and connect the measurement standards for calibration of temperature instruments.
•   Identify the proper thermocouple or RTD table for the sensor in the loop and use the tables in
     calibration.
•   Check the calibration of thermocouples and RTDs.
•   Calibrate an analog electronic temperature transmitter whose input is provided by a thermocouple or an
     RTD.
•   State safety precautions for calibrating temperature instruments in the field.

Special Notes: This training program is delivered by multimedia CD-ROM and can be accessed on a stand alone PC or in a networked learning center.

Instrument Calibration: Calibrating Temperature Instruments CD-ROM - $349.95

==============================

Instrument Calibration: Calibrating Flow Instruments CD-ROM

Duration: 6 hours (includes 1 test)

Audience: This program was designed for instrument technicians and electricians as well as for the multicraft training needs of process and manufacturing facilities. This lesson is designed for participants familiar with the basic principles of calibration including procedures, identifying instrument errors, and the standards for instrument performance. An understanding of algebra is also recommended.

This lesson demonstrates procedures for calibration of flow instruments. The lesson specifically explains calibration of differential pressure transmitters, magnetic flowmeters, vortex shedding flowmeters, and mass flowmeters. Emphasis is placed on the proper set up for calibration and the selection of the proper test equipment.

After completing the lesson, the learner will be able to:

   •   Observe the correlation between differential pressure and flow rate.
•   Identify and set up the measurement standards for calibrating a differential pressure transmitter.
•   Perform a five point check on a differential pressure transmitter.
•   Interpret the results and correct instrument errors.
•   Set up a square root extractor for calibration and adjust its zero.
•   Observe how a magnetic flowmeter generates the output voltage as a result of the input voltage.
•   Calibrate a magnetic flowmeter.
•   Observe how a vortex shedding flowmeter generates output resulting from input.
•   Set the course span jumpers correctly and determine proper calibration of a vortex shedding flowmeter.
•   Connect the interface device to the smart mass flowmeter.
•   Set the interface device to the smart mass flowmeter.
•   Modify the upper and lower range values.
•   Download the new information to the transmitter.
•   Test the mass flowmeter for autozero.

Special Notes: This training program is delivered by multimedia CD-ROM and can be accessed on a stand alone PC or in a networked learning center.

Instrument Calibration: Calibrating Flow Instruments CD-ROM - $349.95

==============================

Instrument Calibration: Calibrating Level Instruments CD-ROM

Duration: 6 hours (includes 1 test)

Audience: This program was designed for instrument technicians and electricians as well as for the multicraft training needs of process and manufacturing facilities. This lesson is designed for participants familiar with the basic principles of calibration including procedures, common instrument errors, and the standards for instrument performance. An understanding of algebra is also recommended.

This lesson demonstrates the steps for calibrating level instruments. Specifically, the lesson shows set up procedures for differential pressure transmitters and electronic displacement level transmitters in a variety of applications.

After completing the lesson, the learner will be able to:

    •   Identify the importance of properly calibrated level instruments.
•   Describe how hydrostatic pressure can be used to sense liquid level.
•   Determine the input range for calibrating a differential pressure transmitter for use in a specific
     level application.
•   Select the input and output measurement standards for calibrating hydrostatic level instruments.
•   Calibrate a differential pressure transmitter used in an open tank or dip pipe, a closed tank with dry
     leg, and a closed tank with wet leg.
•   Define elevated or suppressed zero and determine the amount of zero suppression or elevation in a
     given hydrostatic pressure level gauging system.
•   Describe how an electronic displacement level transmitter uses buoyant force to sense liquid level.
•   Select the input standards for calibrating an electronic displacement level transmitter for liquid-vapor
     and liquid-liquid interface applications.
•   Select the output equipment for calibrating an electronic displacement transmitter.
•   Calibrate an electronic displacement level transmitter for liquid-vapor and liquid-liquid interface
     applications.

Special Notes: This training program is delivered by multimedia CD-ROM and can be accessed on a stand alone PC or in a networked learning center.

Instrument Calibration: Calibrating Level Instruments CD-ROM - $349.95

==============================

Note: CD-ROM Pricing is for the single user/single PC version.
Call 888-777-0753 for network or multiple user pricing.

To order by phone please call toll-free 888-777-0753 during regular business hours.