|
Welding Video Courses
Produced by ITC
Learning Corporation
Audience:
This program is excellent both for the training of welders and for the
multicraft training needs of process and manufacturing facilities.
What Students
Learn: This comprehensive training program consists of 12 videotapes that
train students in the theory and practice of various welding and cutting
techniques.
Special Notes: The video program package contains a
student workbook and an instructor guide.
Components:
Welding Video Set - $2100.00
=======================================================
Principles
and Metallurgy
What Students
Learn: Welding Processes; Properties of Metals; Determining the Properties
of Metals; Identification of Metals; Effects of Welding; Preheating and
Post-Heating.
Principles and Metallurgy Video - $175.00
=======================================================
Joint
Design and Symbols
What Students
Learn: Joint Design; Types of Joints; Fillet Welds; Groove Welds; Welding
Symbols; Fillet Weld Dimensions; Groove Weld Dimensions.
Joint Design and Symbols Video - $175.00
=======================================================
General
Techniques and Safety Practices
What Students
Learn: Personal Safety Gear; Environment and Equipment Safety; Joint
Preparation; Positions and Angles; Arc Length and Travel Speed; Depositing
Beads; Positions and Techniques.
General Techniques and Safety
Practices Video - $175.00
=======================================================
Oxygen-Fuel
Gas Cutting
What Students
Learn: Equipment Set-Up; Setting Operating Pressures; Torch Operation;
Performing a Straight Cut; Performing a Bevel Cut; Special Cutting Applications.
Oxygen-Fuel Gas Cutting Video - $175.00
=======================================================
Brazing
and Braze Welding
What Students
Learn: Capillary Action; Brazing Filler Metals and Fluxes; Equipment
Set-Up; Brazing Aluminum; Braze Welding Cast Iron; Soldering Copper Pipe;
Brazing Copper and Carbon Steel.
Brazing and Braze Welding Video - $175.00
=======================================================
Shielded
Metal-Arc Welding Principles
What Students
Learn: Welding Safety; Electrodes; Welding Equipment; Striking an Arc;
Performing a Practice Weld; Finishing a Weld.
Shielded Metal-Arc Welding
Principles Video - $175.00
=======================================================
Shielded
Metal-Arc Structural and Pipe Welding
What Students
Learn: Performing a Weld using the Inverted V Technique; Preparing a Pipe
Joint for Welding; Pipe Welding Positions; Pipe Welding; Performing a Weld using
the Whip and Pause Technique; Performing a Weld using the Inverted T Technique.
Shielded Metal-Arc Structural and
Pipe Welding Video - $175.00
=======================================================
Principles
of TIG
What Students
Learn: The TIG Electrical System; Electrical Settings; The TIG Shielding
System; Adjusting the Flow Rate; TIG Electrodes; The TIG Torch; The TIG Weld.
Principles of TIG Video - $175.00
=======================================================
TIG
Structural and Pipe Welding
What Students
Learn: Welding Aluminum; Welding Stainless Steel; Welding Carbon Steel
Pipe; Preparing Stainless Steel Pipe; Welding Stainless Steel Pipe; Welding
Carbon Steel Pipe in the 6g Position.
TIG Structural and Pipe Welding
Video - $175.00
=======================================================
Principles
and Techniques of MIG
What Students
Learn: MIG Welding Equipment; Equipment Set-Up; Transfer Methods; MIG
Welding in the Vertical Uphill Position; MIG Welding in the Vertical Downhill
Position; Welding Thick Aluminum.
Principles and Techniques of MIG
Video - $175.00
=======================================================
Weld
Defects: Causes and Corrections
What Students
Learn: Removing a Defective Weld; Overlapping, Undercutting, Distortion,
and Warpage; Cracks, Craters, Porosity, and Inclusions; Burnthrough, Inadequate
Penetration, and Incomplete Fusion; Brittle Welds, Arc Strike, and Excessive
Spatter; Visual and Dye Penetrant Examinations; Nondestructive Examinations.
Weld Defects: Causes and Corrections
Video - $175.00
=======================================================
Cutting:
Plasma-Arc and Air Carbon-Arc
What Students
Learn: Arc Cutting Processes; Air Carbon-Arc Cutting Equipment; Air
Carbon-Arc Cutting Preparations; Air Carbon-Arc Gouging; Plasma-Arc Cutting
Equipment; Plasma-Arc Equipment Setup; Plasma-Arc Cutting.
Cutting: Plasma-Arc and Air
Carbon-Arc Video - $175.00
=======================================================
To order by phone please call toll-free 888-777-0753 during regular
business hours.
|