|
Books |
|
2000 International
Plumbing Code - provides consistent
requirements that can be used across the country to provide
comprehensive regulation of plumbing systems setting
minimum regulations for plumbing facilities
in terms of both performance and prescriptive
objectives. |
|
Buried Pipe Design - Everything you need to
design…install… replace and rehabilitate buried pipe systems
|
| DEWALT
Plumbing Professional Reference - Find
answers quickly and easily with this
on-the-job reference! |
|
Facility Piping Systems Handbook - Second
Edition -
gives you a complete design guide and
reference for all piping systems, including
those in laboratories, and health care
facilities.
|
|
Fitness-for-Service Evaluations for Piping and Pressure
Vessels - The book demonstrates how
the disciplines of stress analysis, materials engineering,
and nondestructive inspection interact and apply to
fitness-for-service assessment. |
| Mathematics
for Plumbers and Pipefitters
- Outlines the basic concepts necessary
for plumbers and pipefitters. |
| Modern
Plumbing - Modern Plumbing provides basic information about
safety, tools,
materials, equipment, procedures,
and career opportunities in the plumbing
field. The text is written in simple
language and is heavily illustrated. |
| National
Plumbing Codes Handbook - This
second edition is a thorough revision
of the standard code book for the
plumbing industry. It is a complete,
convenient, and easy-to-use reference
for the three major plumbing codes in use today. Together with the
local code book, plumbing contractors can use this practical guide to
understand and adhere to the latest code specs in procedures,
installations, materials and documentation. |
| Pipefitter's
Handbook - Compact and pocket-sized, this handy reference
contains thousands of facts and figures relevant to pipefitters,
steamfitters, - anyone concerned
with layout and installation of pipe. |
| Pipe Trades Handbook
and Training Manual - IPT's Pipe Trades Handbook sets the
standard for piping handbooks. It contains
all the necessary information previously
combined in other reference books,
plus much more. It includes information
on: pipe and tube data; valves; fittings,
flanges and gaskets; offsets and calculations;
pipe layout (simplified and detailed);
piping prints; oxy-acetylene set-up
and pipe welding; pipe rigging. |
| Pipe Welding Procedures
- Describes, in detail, the manipulating procedures used to weld pipe
joints. |
|
Piping Calculations Manual -
This on-the-job
resource is packed with all the formulas,
calculations, and practical tips necessary
to smoothly move gas or liquids through
pipes, assess the feasibility of improving
existing pipeline performance, or design new
systems. |
|
Piping Databook
-
Mohinder Nayyar’s Piping Databook can save you
hundreds of work hours and your company thousands of dollars. It’s the one guide
that puts all the practical answers close at hand. |
| Piping
Handbook - Presents the most current and comprehensive
information on pipe
design practice, material application,
and industry standards. |
|
Piping Systems & Pipeline -
The latest industry practices in the design,
inspection, maintenance, and repair of piping systems and pipelines according to
ASME B31 |
|
Plastic Piping Handbook -
The reference of the decade on a subject too long neglected, this indispensable
handbook is finally here to make work flow more smoothly in your engineering or
construction office or site. |
| Plastic Piping
Systems - supplies
all the detailed and current information you'll need to know about the
largest plastic product group used in the world - pipe, valves, and
fittings. |
| Plumber's
and Pipe Fitter's Calculations Manual - The only complete
calculations manual designed to help plumbers and pipefitters with
their day-to-day mathematical
needs. It provides a bounty of tables,
charts, and formulas that provide
instant reference to commonly needed
plumbing calculations. |
| Plumber's
Quick Reference Manual - Written by a master plumber and
instructor,
this on-the-job reference delivers
fast, reliable answers to almost any
question that's likely to arise in
the field. |
| Plumbing - Tips,
Data, and Rules of Thumb -
Presented in a highly visual
format with hundreds of graphics and tables along with text boxes
highlighting key features Including current
plumbing codes also including the International Plumbing Code and
Uniform Plumbing Code. |
| Pocket
Guide to Flanges, Fittings and Piping Data - This handy little
reference is packed with pictures, definitions, and descriptions of
ANSI and API piping materials,
such as flanges, fittings, bolts,
gaskets, and required wrench sizes.
It contains basic information and
data to answer common questions that arise in materials handling, pipe
fitting, and engineering. |
|
Practical SCADA For Industry
- A SCADA system gathers information, such as
where a leak on a pipeline has occurred, transfers the information back to a
central site, alerting the home station that the leak has occurred, carrying out
necessary analysis and control, such as determining if the leak is critical, and
displaying the information in a logical and organized fashion.
|
| CD-ROMs |
| 2000 International
Plumbing and Mechanical Code - Establishes minimum
regulations for mechanical systems using prescriptive and
performance-related provisions. It is founded on broad-based principles
that make possible the
use of new materials and new mechanical
designs. |
| Pipefitting: Lagging and Insulation
- This comprehensive Activ® interactive multimedia
training program consists of four
lessons that train participants to
select, measure, cut and install piping properly. Blueprint
reading is also included. This lesson
shows and explains sequentially the procedures and materials needed
for measuring and cutting block insulation
for piping elbows and flanges. The lesson
also shows how to install and cover
the insulation. The steps in each
procedure as well as the selection and use of necessary tools are
covered in detail. |
| Pipefitting: Materials and Layout
- This comprehensive Activ® interactive multimedia
training program consists of four
lessons that train participants to
select, measure, cut and install piping properly. Blueprint
reading is also included. This lesson
explains the different characteristics of piping systems.
The lesson
demonstrates how to read blueprints
and conduct a field check. Procedures to
measure and cut pipe properly for installation are also covered. |
| Pipefitting: Preparing Piping for
Installation - This comprehensive Activ® interactive
multimedia training program consists
of four lessons that train participants
to select, measure, cut and install
piping properly. Blueprint reading is also
included. This lesson
shows how to set up and operate an
automatic cutting torch, how to prepare
a pipe end using an end preparation tool, and how to align components
for a socket weld joint and butt weld joint. Proper
sequences for each procedure as well as the selection and use of
the necessary tools are also addressed. |
| Pipefitting: Tubing and Thread Pipe
- This comprehensive Activ® interactive multimedia
training program consists of four
lessons that train participants to
select, measure, cut and install piping properly. Blueprint
reading is also included. This lesson
shows how to cut and bend tubing, use tubing fittings,
cut and thread pipe, and use pipe
fittings. The
lesson focuses on the sequence of
the steps in each procedure as well as the proper selection and use of
the necessary tools. |
| Videos |
| Advanced Pipefitting, Part 1 -
1st
video of this four part set covers
an introduction to pipefitting, blueprints,
piping materials, materials list and
field checks, determining pipe length,
fitting measurements, marking a pipe,
and cutting methods. |
| Advanced Pipefitting, Part 2 -
Part
two takes you through torch cutting,
using an automatic cutting torch,
end preparation tool, alignment, checking
alignment and tack-welding, installation, and support. |
| Advanced Pipefitting, Part 3 -
Continue
on in part three through fabricated
joints; mitre joints; riser joints;
centering heads; contour markers;
field marking; and hole projection
markers. |
| Advanced Pipefitting, Part 4 -
Part 4 covers an introduction to plastic pipe and cutting; end
preparation; end cleaning; joining; plastic welding; fiberglass
reinforced
plastic pipe-cutting and end preparation;
making a butt and wrap joint; and
a program review. |
| Machinery Component Maintenance and Repair
Series Part Three: Machinery Piping Considerations - 25 minute
video based on Heinz Bloch's industry standard book "Machinery
Component Maintenance and Repair." |
| Piping, Part 1 - Part one of
this four part set covers preparing for tubing system repair, flaring
tubing, bending and cutting tubing, tubing connections, pipe cutting,
threaded pipe, pipe assembly, and
union replacement. |
| Piping, Part 2 - Covers
general maintenance and insulation removal; elbow removal;
elbow installation; selecting and
installing insulation on an elbow;
insulating a flange and applying cloth;
and plastic-lined piping. |
| Piping, Part 3 - This third
part covers inverted bucket trap disassembly
and reassembly; float-and-bellows trap disassembly and reassembly;
impulse steam trap (piston-type); impulse steam trap (disc-type); The
duplex strainer; and the edge-type strainer. |
| Piping, Part 4 - Final part
covers
cleaning steam condenser tubes, inspecting
and plugging steam condenser tubes,
cutting a tube for removal, collapsing
a tube for removal, replacing a tube,
and gauge glass replacement. |
| Piping and Valve Maintenance Video Set
- This comprehensive 16 part video
course covers piping, advanced pipefitting,
valves, motorized valve actuators,
and relief valves. |
